PS3 red LED blinks and lights - to keep the PS3 Get Back On

Is your PS3 blinking red light and does not turn on? Gives three beeps before it started the blinking? Want to know what can be done at least for the console, even if just long enough to back up your hard drive is out and has created? Here are some tips to help you.

[b]Ps3[/b]

1 Reduce the heat

What has been done to the console before it has developed this problem? Were you playing when it happened suddenly? If so, it is likely thatbe related to too much heat. To run it, place the console near a fan or air conditioner, and leave to cool, about 30-45 minutes.

Make sure it is completely cold at this time. Before this, however, will help you see if there is only one side of the console, which is really hot. If so, this is a sure sign that was caused by the heat.

2 Search melted paste

Sony recommends that often comes back to 1 after step As you know, this is probablynever works. So, to get to the next level and try to see the thermal paste when it is melted. This normally includes decoupling the console. In this case, replace the thermal paste, and then restart the console.

3 Install an intercooler

If you have the means, go get a charge air cooler after finding that it works. Turn it off again, get the air cooler or make sure that the vents to let in enough air to reduce heat. Do not install the intercooler if you need thisUsing a fan or AC and turn on. It 'should now work without stress.

PS3 red LED blinks and lights - to keep the PS3 Get Back On