Step by step guide to the use of PS3 Laser Disc Repair - How to Fix PS3 Laser

When the Blu-ray disc in your PS3 is not working properly, it is likely that the target has been broken. Sony will charge about $ 150 for this problem, which is a huge sum of money to repair, not to mention that you have to wait, probably more than six weeks to get your console back to you in perfect condition. In this article you will learn how to fix PS3 error in laser itself, with step-by-step instructions. You can repair your PS3 Blu-Rayitself, and is not that difficult to do at all.

[b]Ps3[/b]

What you need to fix the PS3 Laser:

• mini screwdriver set (Phillips)
• Replace Blu-Ray laser lens (these can be purchased from eBay or other Blu-ray drive is the part # kem-400AAA)
• One hour of free time
• A clean, well lit work area

Here's how error by replacing the PS3 Blu-ray Laser Lens fixesYourself:

1 Remove the top cover of the PS3, along with the power cord for the Blu-ray.
2 Lift the Blu-Ray from his sitting position and carefully remove the silver band data can (which should have a blue color that ends on them)
3 Remove the two screws on the silver top / bottom of the right side, and the three black screws on the left side of the unit.
4 Lift the metal housing of the Blu-ray drive., Exposing the actual operation of the devicebelow.
5 Loosen the screws on the black panel that covers the circuit lens. Remove the dish carefully.
6 Remove the screws Blu-Ray lens, then remove the lens itself.
7 Put your new lens, so that it sits properly, then you start screwing it all together (known only in reverse order)
8 Voila, you should work on the PS3 like new!

Step by step guide to the use of PS3 Laser Disc Repair - How to Fix PS3 Laser